Preparation of a novel bentonite intercalation composite by changing the chemical state of aluminum

A new environment-friendly bentonite intercalation composite was successfully obtained from alumina sol intercalation. This process used industrial grade pseudo boehmite as the aluminum source and provided with the advantage of zero emission of acidic wastewater. The bentonite intercalation composite was investigated by XRF, ICP, XRD, FT-IR, BET, and pyridine-FTIR. Results indicated that the basal spacing was enlarged from 14.72 to 15.60 Å; the specific surface area increased by 128%; and the total acid content increased from 65.32 to 245.76 μmol/g. The catalytic activity of this composite was tested by alkylation of aromatics with olefins. The results show that the weak Lewis acid generated by extra-framework aluminum and specific surface area play a decisive role, while weak Brønsted acid site is not the active site for this alkylation reaction.     

Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Sextic centrifugal distortion constants: interplay of density functional and basis set for accurate yet feasible computations

Quantum-chemical calculations assist the analysis of laboratory spectra, and often provide the only means to determine spectroscopic data that cannot be accessed experimentally. Accurate predictions of vibrational and rotational spectroscopic parameters are required for applications in the field of high-resolution molecular spectroscopy. While the accuracy issue of the quantum-chemical calculation of vibrational properties and of equilibrium structures has been addressed in the literature, the same is not true for centrifugal distortion constants that however play an essential role for the interpretation of remote sensing data. In this work, the performance of several model chemistries, rooted mainly in density functional theory, in computing sextic centrifugal distortion constants is assessed employing a benchmark set of molecules of both atmospheric and astrochemical relevance. The Jensen’s (aug-)pcs-n basis sets, different flavours of Dunning’s triple-ζ basis sets and the SNSD basis set, are employed in conjunction with different functionals, and their predictions are benchmarked against experimental and theoretical data at the coupled cluster level of theory. This study also demonstrates the reliability of the calculation of sextic centrifugal distortion constants within the Gaussian16 rev. B.01 program package. Reliable predictions of the sextic centrifugal distortion constants for the gauche- and trans-conformers of ethyl-mercaptan are also presented.     

基于三维荧光光谱法和PARAFAC对多环芳烃定性定量分析

三维荧光光谱法在研究多环芳烃(PAHs)类物质的荧光信息时起到了重要作用。多环芳烃类物质具有致癌性,难降解性,多由尾气排放,垃圾焚烧产生,危害着人类健康及环境,因此人们不断探索对多环芳烃检测的方法。实验选取多环芳烃中的苊和萘作为检测物质,利用FLS920荧光光谱仪,为避免荧光光谱仪本身产生的瑞利散射影响,设置起始的发射波长滞后激发波长40 nm,设置扫描的激发波长(λex)范围为:200~370 nm,发射波长(λem)范围为:240~390 nm,对多环芳烃进行荧光扫描获取荧光数据,采用三维荧光光谱技术结合平行因子算法对混合溶液中的苊和萘进行定性定量分析。实验选用的苊和萘均购于阿拉丁试剂官网,配制浓度为10 mg·L-1的一级储备液,再将一级储备液稀释,得到苊和萘浓度为0.5,1,1.5,2,2.5,3,3.5,4和4.5 mg·L-1的二级储备液,并将苊和萘进行混合。在进行光谱分析前需要对苊和萘的光谱进行预处理,采用空白扣除法扣除拉曼散射的影响,并采用集合经验模态分解(EEMD)消除干扰噪声。实验测得苊存在两个波峰,位于λex=298 nm,λem=324/338 nm处,萘存在一个波峰,位于λex=280 nm,λem=322 nm处。选用的PARAFAC算法对组分数的的选择很敏感,因此采用核一致诊断法预估组分数,估计值2和3的核一致值都在60%以上,分别对混合样品进行了2因子和3因子的PARAFAC分解,将分解后得到的激发发射光谱数据和各组分浓度数据进行归一化处理,并绘制光谱图,与归一化处理后的真实的激发发射光谱图和各组分浓度图进行对比。同时将PARAFAC得到的混合样本的预测浓度,通过计算回收率(R)和均方根误差(RMSEP)来判定定量分析的准确度。选择2因子时,各混合样品中苊和萘拟合度为95.7%和96.7%,平均回收率分别为101.8%和98.9%,均方根误差分别为0.0187和0.0316;选择3因子时,各混合样品中苊和萘拟合度为95.3%和95.8%,平均回收率分别为97%和102.5%,均方根误差分别为0.033和0.116,由三项指标可得选用2因子进行定性定量分析的效果明显好于选用3因子。分析实验结果表明,基于三维荧光光谱法和PARAFAC算法对混合样品进行定性定量分析,能够有效的判定混合样品的类别,同时能够成功的预测出混合样品的浓度。     

高盐样品中锂的电感耦合等离子体发射光谱法(ICP-OES)测定研究

锂是重要的战略金属和新能源材料,其开发利用受到全球的高度关注。在高盐卤水特别是盐湖卤水和地下卤水中富含巨量的锂资源,在对这些资源进行锂的开发利用过程中,需对锂的含量进行准确测定,然而卤水中共存的高浓度Na+, K+, Ca2+和Mg2+会对微量锂的准确测定产生严重的干扰。电感耦合等离子体发射光谱法(ICP-OES)具有线性范围宽和多元素同步分析能力,针对卤水中锂的快速准确测定,详细开展了高盐样品中锂的ICP-OES分析方法研究。结果表明,锂在610.364 nm处具有较高的信噪比,且Na+, K+, Ca2+, Mg2+和Ar不会对锂的测定产生显著的谱线干扰。然而,样品中大量共存的Na+, K+和Mg2+会对锂的测定产生严重的基体正干扰,而Ca2+产生负干扰。尽管内标法在消除基体干扰方面具有广泛的应用,但传统的以钇和钪为内标元素的内标法不能有效解决该问题。此外,针对标准加入法操作繁琐、不适合批量样品分析问题,以及基体匹配法需多离子匹配,且不适合样品基体组成变化的批量样品分析等问题,考察了采用单一组分进行复杂基体匹配的可行性。由于NaCl广泛存在于卤水中,且对锂的测定具有显著的增敏效应,通过系列研究发现,通过同时向样品和标准溶液中加入10 g·L-1的NaCl,成功解决了总量不超过40 g·L-1的NaCl, KCl和MgCl2所产生的干扰。尽管采用该法或沉淀预分离方式均不能消除Ca2+产生的负干扰,但当样品中Ca2+含量不高于1.8 g·L-1时,对测定不产生显著的影响。通过采用该方法对三种不同基体组成的卤水样品进行加标回收测定,其回收率在96.60%~104.20%范围内。此外,通过与电感耦合等离子体质谱法(ICP-MS)测定结果进行对比,充分论证了该法的准确性和可靠性(相对误差±3.66%)。该法仅以单一的NaCl进行复杂基体匹配,不仅简化了操作,还实现了基体组成变化的批量样品分析,因而在卤水中锂的快速准确测定及锂资源开发利用方面具有重要意义。     

A solvent-governed surface state strategy for rational synthesis of N and S co-doped carbon dots with multicolour fluorescence

ABSTRACT

Multicolour emissive carbon dots (CDs) are widely investigated by virtue of their merits on fluorescent properties. Method on heteroatom doping assisted with various solvents has been proved efficient in achieving multiple-colour-emissive CDs, especially long-wavelength emission. Herein, a synthesis of multicolour-emissive CDs by controlled surface function is reported. By tuning the thermal-pyrolysis temperature and molar ratio of reactants, optimal emission of the resulted CDs gradually shifts from blue to yellow light with the assistance of different solvents. According to the emissive relationship dependent on excitation, fluorescence lifetimes, and FT-IR of these CDs, the different surface states participated with S and N elements on the surface of carbogenic core govern fluorescent colours of the CDs. In terms of the applications, blue CDs (B-CDs) exhibits high sensitivity for ion detections of Ag⁺ and Fe³⁺, which is further illustrated to have different quenching mechanisms each other because that these ions have the affinity interaction with different surface groups of the CDs. Moreover, blue and yellow CDs solutions are mixed with PVP water solution to fabricate white-light CDs/PVP film, which exhibits stable fluorescence with a CIE coordinate of (0.32, 0.33) and endows these CDs as potentially fluorescent nanomaterial in the solid state lighting field.     

新型非对称二苯并[b,f][1,5]二氮杂环辛四烯的合成

以两种不同取代的2-氨基二苯甲酮为原料,氯苯为溶剂,BF3-Et2O为脱水剂,通过分子间脱水一步环化缩合制备非对称二苯并[b,f][1,5]二氮杂环辛四烯衍生物。运用HPLC监控反应过程,优化合成工艺,得到最佳反应条件为:等物质的量的两种不同取代2-氨基二苯甲酮和BF3-Et2O,在氯苯中回流反应12 h。化合物4a^4c为新化合物,其结构经1H NMR,13C NMR和MS(ESI)表征。     

Dynamical Analysis of a New Chaotic Fractional Discrete-Time System and Its Control

This article proposes a new fractional-order discrete-time chaotic system, without equilibria, included two quadratic nonlinearities terms. The dynamics of this system were experimentally investigated via bifurcation diagrams and largest Lyapunov exponent. Besides, some chaotic tests such as the 0–1 test and approximate entropy (ApEn) were included to detect the performance of our numerical results. Furthermore, a valid control method of stabilization is introduced to regulate the proposed system in such a way as to force all its states to adaptively tend toward the equilibrium point at zero. All theoretical findings in this work have been verified numerically using MATLAB software package.